PART |
Description |
Maker |
ADCMP370 ADCMP371 ADCMP371AKS-REEL ADCMP371AKS-REE |
General Purpose Comparator w/an Open - Drain Output General Purpose Comparator w/a Push - Pull Output Stage
|
Analog Devices
|
125-0304-0 125-0311-5 125-0309-3 125-0302-4 125-03 |
KUPPLUNG PUSH PULL UEBERWURFKAPPE 16POL EINBAUBUCHSE PUSH PULL 16POL KUPPLUNG PUSH PULL UEBERWURFKAPPE 12POL EINBAUBUCHSE PUSH PULL 12POL EINBAUSTECKER PUSH PULL 20POL EINBAUSTECKER PUSH PULL 12POL STECKER PUSH PULL UEBERWURFKAPPE 12POL STECKER PUSH PULL UEBERWURFKAPPE 20POL KUPPLUNG PUSH PULL UEBERWURFKAPPE 20POL STECKER PUSH PULL UEBERWURFKAPPE 16POL EINBAUSTECKER PUSH PULL 16POL STECKER AUSSENGEWINDE 16POL EINBAUSTECKER PUSH PULL 8POL KUPPLUNG AUSSENGEWINDE 16POL STECKER AUSSENGEWINDE 20POL EINBAUBUCHSE PUSH PULL 20POL EINBAUBUCHSE推拉20POL STECKER AUSSENGEWINDE 6POL STECKER AUSSENGEWINDE 6POL EINBAUSTECKER PUSH PULL 6POL EINBAUSTECKER推拉6POL EINBAUSTECKER AUSSENGEWINDE 4POL
|
Molex, Inc.
|
MCP6561 MCP6561R MCP6561RT-E_LT MCP6561RT-E_MS MCP |
1.8V Low Power Push-Pull Output Comparator
|
Microchip Technology
|
MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ... The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ... Push-Pull Output Sub-Microamp Comparators The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package, The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package. The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ... The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ... From old datasheet system IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
MAX7323ATET |
I<sup>2</sup>C Port Expander with 4 Push-Pull Outputs and 4 Open-Drain I/Os 4 I/O, PIA-GENERAL PURPOSE, QCC16
|
Maxim Integrated Products, Inc.
|
1650KA 1650PA 1650TA 1650E 1650RA 1650WA 1650G 165 |
Push - Pull Audiophile - Output (1608-1650 A Series)
|
Hammond Manufacturing Ltd.
|
HA1631S01LP HA1631S04 HA1631S02CM |
Single CMOS Comparator (Push Pull/Open Drain Output)
|
Renesas Electronics Corporation.
|
MMBT9013 |
1W OUTPUT AMPLIFIER OF POTABLE RADIOS IN CLASS B PUSH-PULL OPERATION
|
Unisonic Technologies
|
ADM1818-10AKS-REEL ADM1818-20AKS-REEL ADM1818-10AK |
Microprocessor Supervisory in SOT-23 with Manual Push Button Option Microprocessor Supervisory in SOT-23 with Open Drain Output Choices Microprocessor Supervisory in SOT-23 with Active High Push-Pull Output
|
Analog Devices
|
MAX5077AUD MAX5077 |
Push-Pull FET Driver with Integrated Oscillator and Programmable Clock Output
|
MAXIM[Maxim Integrated Products]
|